Paver Base 3/4" is a natural rock road base material sized 3/4" and smaller for use as a subbase prior to laying paver sand and pavers, flagstone, brick patio, etc.
This material meets APWA specifications.
Best Results: For best results and to reduce weed growth, install base around 3" - 6" deep while compacting using a vibrating plate compactor and spraying with light amount of water while compacting. Typically you will see between 15% - 25% compaction when using a plate compactor. This compaction may require ordering additional material amount that standard coverages indicate.
Using a subgrade base material and properly compacting will help your project last going forward. This is especially important if you are installing a patio or concrete area, where sod or grass used to be as the soil there is not a well graded compactable material in most cases.
Coverage per Cubic Yard
300 Square Feet
150 Square Feet
100 Square Feet
75 Square Feet
60 Square Feet
50 Square Feet
42 Square Feet
37 Square Feet
Recommended for the Paver Base 3/4" Natural Gravel Roadbase APWA Spec